Linksys WAP54G Wireless-G Access Point Review

The setup documentation is valid only if your DHCP serves addresses beginning with 192.168.1.xxx! This was not stated in the documentation, so it took me some time to guess that the Documentation effort was outsourced, and I'd need to resolve the issue myself.
Advice: Most casual users will have their internal IP addresses set to 192.168.1.xxx, but if this is NOT your case, you must change the "default ip address of 198.168.1.245" that is pre-configured in the WAP54G to something compatible with our network. -- In order to accomplish this step, you will need to temporarily reconfigure some PC/laptop to a compatible IP address for communicating with the Linksys (such as 192.168.1.004), then with the linksys cabled to that PC, you can run the LinkSys setup and reconfigure the IP address range.

Buy it here now!